Prepare your opening
Seal the perimeter between sheathing and tile bond coat with 100% silicone or any approved isolation membrane approved for vertical applications
Shower Niche Installation
4 simple steps for a finished shower niche in under 10 minutes!
Prepare your niche
Clean the back of the shower niche flange with Denatured Alcohol and apply 100% silicone sparingly to the perimeter of the tile flange of the shower niche.
Set in place
Double-check your measurements before attempting installation. Push the niche in place and apply pressure against wall. Ensure that the product sits level in opening. It may be necessary to apply painters' masking tape to hold the product in place before it dries.
Finish
Set your tile on the back panel with modified thinset mortar. Caulk & seal the perimeter of the tile flange to the tile; do not use grout.